BXDWW - AMERCOAT, 94016 RESN

Product Identification

Product ID:AMERCOAT, 94016 RESN
MSDS Date:05/27/1993
FSC:8010
NIIN:00N058107
Kit Part:Y
MSDS Number: BXDWW

Responsible Party
AMERON PROTECTIVE COATINGS
201 N BERRY ST
BREA, CA 92622-1020
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 714-529-1951

Cage: 0Y2E4

Contractor
AMERON PROTECTIVE COATINGS
1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

Ingredients

SILICA, CRYSTALLINE - TRIPOLI;(SILICA (TRIPOLI))

CAS: 1317-95-9

RTECS: VV7336000

Fraction By Weight: <35%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST


ACRYLIC RESIN POLYMER MAY CONTAIN INGREDIENT 3

Fraction By Weight: <25%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST


ETHYLHEXYL ACRYLATE

Fraction By Weight: <25%

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST


TITANIUM OXIDE;(TITANIUM DIOXIDE). MAY CONTAIN INGREDIENTS

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICA, AMORPHOUS, DIATOMACEOUS EARTH

CAS: 61790-53-2

RTECS: VV7311000

Fraction By Weight: <2.5%

OSHA PEL 20 MPPCF; Z-3

ACGIH TLV: 10 MG/M3 TDUST


ALUMINUM HYDROXIDE

CAS: 21645-51-2

RTECS: BD0940000

Fraction By Weight: <1.5%

OSHA PEL N/K

ACGIH TLV: N/K


KAOLIN;(CLAY)

CAS: 66402-68-4

Fraction By Weight: <15%

OSHA PEL N/K

ACGIH TLV: N/K


ACETIC ACID, BUTYL ESTER; (BUTYL ACETATE) (CERCLA). LD50

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 11.11%

OSHA PEL 150 PPM

ACGIH TLV: 150 PPM;200 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


0.93 @ 68F.

CAS: 109909-27-5

Fraction By Weight: <10%

OSHA PEL N/K

ACGIH TLV: N/K


ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER; (PROPYLENE

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: 6.09%

OSHA PEL N/K

ACGIH TLV: N/K


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


>10 G/KG.

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: <5%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG(FE)/M3FUME,B2


PROPIONIC ACID, 3-ETHOXY-,ETHYL ESTER;(ETHYL

CAS: 763-69-9

RTECS: UF3325000

Fraction By Weight: 1.51%

OSHA PEL N/K

ACGIH TLV: N/K


SILICA, AMORPHOUS PRECIPITATED AND GEL; (SILICA

CAS: 112926-00-8

RTECS: VV7315000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


COPPER, (PHTHALOCYANINATO(2-))-;(COPPER PHTHALOCYANINE)

CAS: 147-14-8

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


1.6

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 1.27%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

Hazards

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:VAP/SPRAY MIST CAN BE HARMFUL.
IRRITATING TO EYES, SKIN, NOSE & THROAT. EXCESSIVE INHAL CAN CAUSE
HEADACHE, NAUSEA, OR DIZZINESS. REPEATED & PROLONGED OCCUPATIONAL
OVEREXP TO SOLVENTS IS ASSOCIATED W/ PERMANENT BRAIN & CNS DMG. CAN
BE HARMFUL IF SWALLOWED. CAN BE HARMFUL IF INHALED. CAN BE HARMFUL
IF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-TRIPOLI: IARC
MONOGRAPHS, SUPPLEMENT, VOL 7, PG 347, 1987: GROUP 2A. NTP 7TH
ANNUAL REPORT(SUPDAT)
Effects of Overexposure:HLTH HAZ: ABSORBED THROUGH SKIN. OVEREXP CAN
DMG LUNGS, CNS. OVEREXP CAN CAUSE SKIN & EYE BURNS &/INJURY.
CHEMICAL PNEUMONIA. ASPIRATION HAZARD.
Medical Cond Aggravated by Exposure:RESPIRATORY. SKIN.

First Aid

First Aid:INHAL: PROVIDE FRESH AIR; IF BREATHING LABORED, GIVE O*2/ARTF
RESP. SKIN: WASH THOROUGHLY W/SOAP & WATER. EYES: FLUSH IMMED
W/PLENTY OF WATER FOR AT LEAST 15 MINS & GET MED ATTN. INGEST:
DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING.
CONSULT MD/POISON CONTROL CENTER IMMED. TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point Method:SCC
Flash Point:90.0F,32.2C
Lower Limits:1.00%
Upper Limits:13.10%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:CLSD CNTNRS MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT. ISOLATE FROM HEAT, ELEC EQUIP, SPARKS & OPEN FLAME.
VAPORS MAY SPREAD LONG DISTANCES, CAUSE FLASH(SUPDAT)

Accidental Release

Spill Release Procedures:AVOID BREATHING OF VAPORS. USE ABSORBENT
CLEANUP MATERIALS. PLACE IN SEPARATE CONTAINER. KEEP OUT OF SEWERS
& WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIMINATE ALL SOURC ES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CNTNR CLSD, UPRIGHT WHEN NOT IN
USE. STORE IN COOL, DRY, WELL-VENT AREA. AVOID STORAGE TEMPERATURES
>100F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
VAPORS OR SPRAY MIST OR CONTACT WITH SKIN & EYES. GROUND CONTAINERS
WHEN POURING. DO NOT WELD OR FLAME CUT AN EMPTY CNTNR. GROUND
CONTAINERS WHEN P OURING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA CERTIFIED RESP. FOR SPECIFIC CNDTNS,
REFER TO CURRENT NIOSH POCKET GUIDE TO CHEMICAL HAZARDS. USE
AIR-LINE RESPS IN CONFINED/RESTRICTED VENTILATION AREAS. REFER TO
29 CFR, OSHA PARTS 1910 & 1915 FOR COATING OPERATIONS.
Ventilation:SUFF VENT IN VOL & PATTERN SHOULD BE PROVIDED TO KEEP AIR
CONTAM CONC BELOW TLV LIMIT. REMOVE WELDING/FLAME (SUPDAT)
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA. FULL PROTECTIVE CLOTHING. SPARK-PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ: FIRE/IGNITE EXPLOSIVELY. VENT: CUTTING DECOMP PRODUCTS.
REFER TO 29 CFR, OSHA PARTS 1910 & 1915 FOR COATING OPERATIONS.
EXPLAN OF CARCIN: ON CARCINOGENS, 1994. ANTICIPATED TO BE
CARCINOGEN. TARGET ORGAN: LUNGS.

Chemical Properties

Boiling Pt:B.P. Text:>259F,>126C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.29-1.56
Evaporation Rate & Reference:0.12-1.00(BUAC=1)
Appearance and Odor:LIQUID W/SOLVENT ODOR.
Percent Volatiles by Volume:32

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:CO & CO*2. IRON OXIDE FUMES. SILICON
OXIDE FUMES.

Disposal

Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS. EPA WASTE NO:
D001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.